Write At Command Station V104 [SAFE]

void loop() { // Read the data from EEPROM location 0 byte data = EEPROM.read(0); Serial.print("Data at location 0: "); Serial.println(data);

The syntax of the WriteAt command is as follows:

#include <EEPROM.h>

// Read the data from EEPROM location 10 data = EEPROM.read(10); Serial.print("Data at location 10: "); Serial.println(data);

delay(1000); } In this example, we write the values 10 and 20 to EEPROM locations 0 and 10, respectively. Then, we read the data from these locations and print it to the serial console. write at command station v104

Here's an example sketch that demonstrates how to use the WriteAt command:

The WriteAt command is a part of the Arduino EEPROM library, which provides functions to read and write data to EEPROM. The WriteAt command specifically allows you to write a byte of data to a specific location in EEPROM. void loop() { // Read the data from

// Write another byte to EEPROM location 10 EEPROM.writeAt(10, 20);